Mini Xtylos HPE
\nCJ3002 Mini Xtylos HPE
\nCJ3003 Mini Xtylos
\nMini Xtylos HPEMini Xtylos HPE
\nConform to the European Community DirectivesClass 1 appliance according to standard EN 60598-1 The fitting is protected against penetration by solid bodies of over 12mm (0.47\u201d) in diameter, but not against dripping water, rain, splashes or jets of waterMaximum ambient temperatureC ETL USThis product is supplied in compliance with European Directive 2012\/19\/EU – Waste Electrical and Electronic Equipment (WEEE). To preserve the environment please dispose\/recycle this product at the end of its life according to the local regulationNot suitable for household illuminationThis product is intended for the following areas of application: studios, stages, theaters, exhibitions, trade fairs, events, theme parks, entertainment venues, architectural lighting and similarRISK GROUP 3 – Warning: possibly hazardous optical radiation emitted from this product. Do not look at operating lamp source. Eye injury may result. EN\/IEC 62471 – Hazard distance: refer to the manualMinimum distance of illuminated objectsUKCA – Comply to the UK regulations
\nEver since the introduction of the XTYLOS fixture, Claypaky has been focused on developing new, pioneering technologies that offer new ways to motivate designers to reach further to inspire audiences. New MINI XTYLOS HPE opens opportunities to bring this unique technology where smaller, energy efficient, yet powerful fixtures are required for small and large venues and events.
\nMINI XTYLOS HPE (CJ3002) is a small form factor fixture with Claypaky\u2019s innovative and proprietary RGB laser source, lasting 20,000 hours, that produces saturated, deep colors without any visible hotspots with its exclusive TURBO COLOR system.
\nThe fixture offers linear virtual CTO, one effect wheel with two rotating and interchangeable prisms and one interchangeable frost filter, a 24-bit digital dimmer, a fast digital stop\/strobe and have an aperture range of 1\u00b0 to 4\u00b0 to produce their incredible beam effects.
\nIn addition to the typical features of the XTYLOS family, the MINI XTYLOS HPE delivers some new and exciting features: The unit offers endless pan rotation in both directions, that can be controlled at various speeds.
\nMINI XTYLOS HPE is very compact, operates on 100 to 240VAC and only consumes 80VA of power at 230VAC. The unit weighs just a mere 9 kilograms (20 pounds).
\nFor the beam applications, the MINI XTYLOS HPE is the best option thanks to its high intensity which cannot be achieved by any other LED based beam fixtures. With only 20W laser engine power consumption, the MINI XTYLOS HPE delivers 2.5Mcd with 1\u00b0 beam aperture.
\nThe XTYLOS laser light source is currently the only technology that allows us to make such a small and compact beam fixture.
\nIn the United States, the variance issued by FDA CDRH is required for the use of the MINI XTYLOS HPE (the same variance as for the Xtylos). The MINI XTYLOS is also available in a adjusted output version (CJ3003 ) which is fully homologated and does not require any FDA CDRH variance for the use in the United States
\nLight source: tailor-made RGB laser engine, enclosed in a sealed module
\nLong lasting light source (20,000 hours) with minimal decay
\nLaser-based system with derating to preserve laser diodes
\nTotal output:
\n– MINI XTYLOS HPE: 2.5Mcd with 1\u00b0 beam aperture
\n– MINI XTYLOS: 1.5Mcd with 1\u00b0 beam aperture
\nMINI XTYLOS HPE (CJ3002) can be operated also in the adjusted output version to emulate the MINI XTYLOS (CJ3003) behavior
\nSolid, flat field, saturated, ultraconcentrated light beam without any visible hotspots
\nExclusive mid-air graphic effects (BLazer effects)
\nAperture: 1\u00b0-4\u00b0 range
\nRGB additive color mixing, with exclusive TURBO COLORS
\nLinear virtual CTO 2500K \u2013 6500K
\nUnequalled color consistency both across different fixtures and during lifetime
\nEndless PAN Rotation
\nOne wheel with 2 rotating prisms (Pyramid 16 facets, Linear 6 facet) and 1 frost filter
\nUnmatched effect and color change speed
\nMotorized focusing to zoom in the prism and the frost
\nUltra-precise 24-bit digital dimmer
\nHigh speed, digital stop-strobe effect
\nExtremely compact housing
\nCloudIO Ready: fully compatible with CloudIO
\nLaser engine power consumption: MINI XTYLOS HPE (CJ3002): 20W, MINI XTYLOS (CJ3003): 12W
\nWeight: only 9 kg (20 lbs)<\/p>\n","protected":false},"excerpt":{"rendered":"
Ever since the introduction of the XTYLOS fixture, Claypaky has been focused on developing new, pioneering technologies that offer new ways to motivate designers to reach further to inspire audiences. New MINI XTYLOS HPE opens opportunities to bring this unique technology where smaller, energy efficient, yet powerful fixtures are required for small and large venues and events.<\/p>\n
[html_block id=\"7667\"]<\/strong><\/span><\/p>\n","protected":false},"featured_media":32348,"template":"","meta":{"inline_featured_image":false},"product_brand":[],"product_cat":[186,190,191,1075],"product_tag":[],"class_list":["post-32345","product","type-product","status-publish","has-post-thumbnail","product_cat-lightning-hy","product_cat-moving-lights-hy","product_cat-moving-head-hy","product_cat-moving-head-beam-hy","first","instock","shipping-taxable","product-type-simple"],"yoast_head":"\n