Pin SpotD

Pin SpotD LED is a true LED replacement for a traditional Pin Spot. Featuring both the beam and output characteristics of the original, the Pin SpotD is able to be used in all the same applications.
Main features:
High power LED source and parabolic reflector delivering a tight, bright beam
Available in both Tungsten and Daylight colour temperature versions
Remove heat, dimmers and lamp changes in one go.
LIGHT SOURCE
Source: 13W high-power white LED
CCT: (TU) 2.900 K – (DY) 6.100K
Luminous flux: (TU) 755 lm – (DY) 978lm
Lux: (TU) 5’030 lx – (DY) 6’320lx @3 m
CRI: (TU) 90 – (DY) 80
Source life expectancy: > 30.000 h
OPTICS
Beam angle: 6°
Field angle: 12°
DYNAMIC EFFECTS
Static mode: selection of static dimmer
Manual mode: manual adjustment of dimmer and strobe
Auto mode: built-in programs with execution speed adjustment
BODY
Body: sturdy die-cast aluminium body
Body colour: black
CONTROL
Protocols: DMX512
DMX channels: 1 / 3channel
RDM: RDM for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 3 selectable dimming modes available
Strobe / shutter: 1 – 28 Hz, electronic
Display battery: self-charging battery backup
Operating temperature: -10° ~ +45°
ELECTRICAL
Mains power supply: 100-240V – 50/60Hz
Max power consumption: 18,9W
Max power consumption (at 120V): 19,6W
PHYSICAL
IP rating: 30
Cooling: active, silent operation
Suspension and fixing: bracket for hanging and positioning
Signal connection: XLR 5p IN/OUT connectors
Power connection: moulded IP power IN connector
Dimensions (WxHxD): 209x167x238mm / 8.23”x6.57”x9.37”
Weight: 1,8kg / 3.97lbs
CERTIFICATIONS / APPROVALS
Certifications / Approvals: CE, UKCA, RCM
BOX CONTENT
1 x PINSPOTD
User Manual