EclPanel TWC

EclPanel TWC, is the compact 2×1 LED soft light that provides a beautiful, wide source of soft and precise colours. In addition to this, the PROLIGHTS EclPanel TWC comes with a full range of white reproductions, from daylight through to tungsten tones, reaching a superior light quality with high CRI, TLCI and TM-30. The EclPanel TWC allows for quick and accurate local adjustment of light through 3 rotatory knobs with three fully featured modes: CCT with +/- green shift, HSI for total control of hue, saturation and intensity, FX mode to access the on board pixel cinema effects. The unit can also be controlled on a per-section basis, allowing for reproduction of onboard customisable effects or to be self-made through the lighting desk. Both methods provide eye-candy, with the appealing and modern front looks and cinematic special effects. The unit is designed with an onboard driver and built-in power supply and, being lightweight, the EclPanel TWC offers easy rigging and cabling making it the perfect lighting tool for every location.
Main features:
740W RGB + Warm White Led source (driven @430W)
CRI > 95,5; R9 > 92; TLCI > 92
8 section pixel control and built-in lighting effects for Cinema applications
Silent operation with multiple fan modes
Battery connection (4pXLR 24-36V): compatible with industry standard external batteries (optional)
LIGHT SOURCE
Source: 740W RGB + Warm White LEDs (driven @ 430W)
Luminous flux: 34’236lm @4.000 K with MD filter
Lux: @4000K, 517lx @5 m
CRI: 94,6 @3.200 K; 95,5 @5.600 K
R9: 97 @3.200 K; 92 @5.600 K
TLCI: 92 @5.600 K
TM30 Rf: 92 @3.200 K; 89,5 @5.600 K
TM30 Rg: 103 @3.200 K; 102,4 @5.600 K
Source life expectancy: > 50.000 h
OPTICS
Beam angle: 102°
Field angle: 159°
Lens type: Medium Density diffusion panel (interchangeable)
Additional optics: see available accessories
COLOUR SYSTEM
Colour control: XY, CCT, RGBW, Gel, HSI, Source Emulation, colour macros, CTO on colours
Colour mixing: RGB + Warm White
CCT: CCT control range from 2.200K to 15.000K, + / – green correction, tungsten emulation
White presets: 2.800K – 10.000K with 28 K resolution
Colour wheel: virtual colour wheel with macros
Macros: Gels library on-board
DYNAMIC EFFECTS
Control Resolution: 16-bit dimmer, colours
Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
BODY
Body: sturdy die-cast aluminium body
Body colour: black
CONTROL
Protocols: DMX512, RDM, W-DMX, rotatory knob
Stand Alone: selectable mode through 3 rotatory knobs
Pixel control: 8 section control
Wireless Control: integrated, CRMX + WDMX TRX
RDM: RDM for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Strobe / shutter: 1 – 30 Hz, electronic
Operating temperature: -10° ~ +45°
LED Control: flicker free frequency with adjustable PWM
Selectable PWM: 600 ~ 36.000 Hz
ELECTRICAL
Mains power supply: 100-240V – 50/60Hz
Low Voltage DC mains: 24-36V
Max power consumption: 460W
Output (at 230V): 5 units on a single power line
Power factor: >0,94
PHYSICAL
IP rating: 20
Cooling: active, silent operation
Suspension and fixing: bracket for hanging and positioning
Signal connection: Amphenol XLR 5p IN/OUT connectors
Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
Low Voltage DC connector: XLR 4p
Dimensions (WxHxD): 819x431x144mm / 32.24”x16.97”x5.67”
Dimensions with PO system (WxHxD): 836x431x144mm / 32.91”x16.97”x5.67”
Weight: 15,3kg / 33.73lbs
Weight with PO system: 17,1kg / 37.7lbs
CERTIFICATIONS / APPROVALS
Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
BOX CONTENT
1 x ECLPANELTWC
1 x 1,5 meters power cable (BARE END – NEUTRIK POWERCON TRUE1 IP65)
1 x ECLFRSPG
User Manual