EclProfile HD2 updates EclProfile HD ranges with extra brightness and higher CRI / R9 / TLCI. The fixture is a proper LED replacement for the traditional 750W Tungsten ellipsoidal luminaire. The optical system harnesses the power of a 230W COB LED to create an even beam with clean shutter cuts and beautiful sharp or soft edge gobo focusing. Featuring HD dimming and available in a 3.200 K or 5.700 K, the EclProfile HD2 delivers the performance and quality of output demanded from this level of the luminaire.
Main features:
Outstanding brightness over 10K lm for DY and 9K lm for TU versions
CRI > 97 (TU) and CRI > 96 (DY), High R9 and TLCI values
LIGHT SOURCE
Source: 230W high-power white LED
CCT: (TU) 3.200 K – (DY) 5.700K
Luminous flux: (TU) 5°: TBD – 10°: TBD – 14°: 8’562 lm -19°: 8’345 lm – 26°: 9’261 lm – 36°: 8’964 lm – 50°: 7’683lm @full
Luminous flux: (DY) 5°: TBD – 10°: TBD – 14°: 9’649 lm -19°: 9’822 lm – 26°: 10’974 lm – 36°: 10’781 lm – 50°: 9’053 lm @full
Lux: (TU) 5°: TBD – 10°: TBD – 14°: 11’055 lx – 19°: 6’495 lx – 26°: 4’954 lx – 36°: 2’728 lx – 50°: 1’381lx @5 m full
Lux: (DY) 5°: TBD – 10°: TBD – 14°: 12’000 lx – 19°: 7’118 lx – 26°: 5’571 lx – 36°: 3’105 lx – 50°: 1’569lx @5 m full
CRI: (TU) >97; (DY) >96
R9: (TU) >87; (DY) >96
TLCI: (TU) >97; (DY) >96
TM30 Rf: (TU) >92; (DY) >89
TM30 Rg: (TU) 100; (DY) 100
Source life expectancy: > 50.000 h
OPTICS
Beam angle: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / zoom 15°-30° / zoom 25°-50°
Lens type: high-quality glass lens optics
Focus: manual
COLOUR SYSTEM
Colour mixing: static white
DYNAMIC EFFECTS
Control Resolution: 16-bit dimmer
Gobo size: B, outer: 86 mm – image: 64,5 mm – thickness: 1,1 mm
Static mode: selection of static colour
Manual mode: manual adjustment of colour
Auto mode: built-in programs with execution speed adjustment
BODY
Body: sturdy die-cast aluminium body
Body colour: black
CONTROL
Protocols: DMX512, RDM
DMX channels: 1 / 2 / 5channel
RDM: RDM for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Strobe / shutter: 1 – 30 Hz, electronic
Operating temperature: -10° ~ +45°
LED Control: flicker free operation
Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
Mains power supply: 100-240V – 50/60Hz
Max power consumption: 210W
Output (at 230V): 15 units on a single power line
Power factor: TU: >0.90 – DY: >0,94
PHYSICAL
IP rating: 20
Cooling: combination of heat pipe cooling system and low noise fan
Suspension and fixing: bracket for hanging and positioning
Signal connection: Amphenol XLR 5p IN/OUT connectors
Power connection: Neutrik powerCON IN/OUT connectors
Dimensions (WxHxD): 342x506x530mm / 13.46”x19.92”x20.87”
Weight: 7,11kg / 15.67lbs
CERTIFICATIONS / APPROVALS
Certifications / Approvals: CE, UKCA, RCM
BOX CONTENT
1 x ECLHD2
1 x 1,5 meters power cable (BARE END – NEUTRIK POWERCON)
User Manual
У вас есть вопросы по этому продукту? Отправьте нам электронное письмо, и мы свяжемся с вами в ближайшее время.
