LumiPix 12UQPRO

LumiPix 12UQPRO is a 1 m long linear colour changer equipped with 12 high-efficiency RGBW/FC LED (8W each). The control system is customisable allowing section control and advanced possibilities in effect generation such as LED video or sound activated arrays.
Main features:
Pixel control: section control
Advanced on-board effects generation
USB port for USB WIFI transceiver (optional)
Flicker-free operation
LIGHT SOURCE
Source: 12x8W RGBW LEDs
Luminous flux: 2’241lm
Lux: 1’813lx @3 m full
Source life expectancy: > 50.000 h
OPTICS
Beam angle: 19°
Field angle: 36°
Lens diameter: 38mm / 1.5”
Additional optics: 45° (optional)
COLOUR SYSTEM
Colour mixing: RGBW / FC
CCT: CCT control through dedicated DMX channel
Colour wheel: virtual colour wheel with macros
Macros: several pre-built pixel macros with adjustable speed
DYNAMIC EFFECTS
Static mode: selection of static colour
Manual mode: manual adjustment of colour
Auto mode: built-in programs with execution speed adjustment
Sound mode: music activation through internal microphone and sensitivity control
BODY
Body: sturdy die-cast aluminium body
Body colour: black
CONTROL
Protocols: DMX512
DMX channels: 4 / 7 / 9 / 12 / 17channel
Pixel control: 1 / 3 section control
Wireless Control: optional, proprietary protocol compatible with WIFIBOX, WDBOX
Display: LED display user interface
Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
IR: infrared sensor controlled by remote
Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Strobe / shutter: 1 – 28 Hz, electronic
Operating temperature: 0° ~ +45°
LED Control: flicker free frequency with adjustable PWM
ELECTRICAL
Mains power supply: 100-240V – 50/60Hz
Max power consumption: 73,6W
Max power consumption (at 120V): 71W
Output (at 230V): 18 units on a single power line
Output (at 120V): 7
PHYSICAL
IP rating: 20
Cooling: passive cooling and fan-free
Suspension and fixing: double hanging bracket suitable for safe hanging and for floor positioning
Data: USB port for USB WIFI transmitter (optional)
Signal connection: XLR 3p + 5p IN/OUT connectors
Power connection: Seetronic powerCON IN/OUT connectors
Dimensions (WxHxD): 1.000x56x168mm / 0.04”x2.2”x6.61”
Weight: 3,3kg / 7.28lbs
CERTIFICATIONS / APPROVALS
Certifications / Approvals: CE, UKCA, RCM
BOX CONTENT
1 x LUMIPIX12UQPRO
1 x 1,5 meters power cable (BARE END – SEETRONIC power connector)
User Manual