ArenaCob 4FC is a full colour LED replacement for a traditional 4 cell DWE blinder. Each of the individually controllable 75 W RGBW cells deliver a consistent, powerful punch that has been designed to perform in even the largest environments.
Main features:
Four powerful RGBW LED cells with sizing and spacing matching traditional linear blinders
Individual cell control for effects and amber shift for tungsten emulation
IP65 housing for the most demanding environments with a virtually limitless ‘building block’ rigging system
LIGHT SOURCE
Source: 4x75W RGBW LEDs
Luminous flux: (24°) 5’393 lm – (40°) 6.260lm
Lux: (24°) 2’413lx @3 m full
Lux: (40°) 891lx
Source life expectancy: > 50.000 h
OPTICS
Beam angle: (inc) 24° – (opt) 40°
Field angle: 46°
Pixel pitch: 150mm / 5.91”
Lens diameter: 100mm / 3.94”
Lens type: parabolic reflector in combination with HD fresnel lens
Additional optics: 40°(opt) – 32° without magnetic lens
Other: magnetic replacement of front lens
COLOUR SYSTEM
Colour mixing: RGBW / FC
CCT: CCT control through dedicated DMX channel
White presets: 2.000 K ~ 8.000K
Colour wheel: virtual colour wheel with macros
DYNAMIC EFFECTS
Pixel patterns: pre-programmed dynamic and static patterns
FX generator: adjustable foreground/background colour, index, speed, direction
Static mode: selection of static colour
Manual mode: manual adjustment of colour
Auto mode: built-in programs with execution speed adjustment
Special features: HALO DWE dimming and amber-shift simulation
BODY
Hardware on-board: on board mechanics for modular assembly of multiple fixtures
Body: sturdy die-cast aluminium body
Body colour: black
CONTROL
Protocols: DMX512, RDM
DMX channels: HALO 1 / 4 channel – STD 4 / 6 / 15 channel – EXT 16 / 21 / 27channel
Pixel control: pixel2pixel control
RDM: RDM for remote monitoring and settings
Display: black OLED touch display
Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Strobe / shutter: 1 – 28 Hz, electronic
Display battery: self-charging battery backup
Operating temperature: -20° ~ +45°
LED Control: flicker free operation
ELECTRICAL
Mains power supply: 100-240V – 50/60Hz
Max power consumption: 227W
Max power consumption (at 120V): 230W
Output (at 230V): 16 units on a single power line
Output (at 120V): 8 units on a single power line
PHYSICAL
IP rating: 65 for temporary outdoor application, not for fixed installations
Cooling: passive cooling and fan-free
Suspension and fixing: bracket for hanging and positioning
Signal connection: Seetronic XLR 5p IN/OUT connectors
Power connection: Seetronic powerCON waterproof IN/OUT connectors
Dimensions (WxHxD): 619x167x264mm / 24.37”x6.57”x10.39”
Weight: 8kg / 17.64lbs
CERTIFICATIONS / APPROVALS
Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
BOX CONTENT
1 x ARENACOB4FC
1 x 1,5 meters power cable (BARE END – SEETRONIC IP65 power connector)
User Manual
Ունե՞ք հարցեր այս ապրանքի վերաբերյալ: Ուղարկեք մեզ նամակ, և մենք շուտով կապ կհաստատենք Ձեզ հետ:
