Mini Xtylos HPE
CJ3002 Mini Xtylos HPE
CJ3003 Mini Xtylos
Mini Xtylos HPEMini Xtylos HPE
Conform to the European Community DirectivesClass 1 appliance according to standard EN 60598-1 The fitting is protected against penetration by solid bodies of over 12mm (0.47”) in diameter, but not against dripping water, rain, splashes or jets of waterMaximum ambient temperatureC ETL USThis product is supplied in compliance with European Directive 2012/19/EU – Waste Electrical and Electronic Equipment (WEEE). To preserve the environment please dispose/recycle this product at the end of its life according to the local regulationNot suitable for household illuminationThis product is intended for the following areas of application: studios, stages, theaters, exhibitions, trade fairs, events, theme parks, entertainment venues, architectural lighting and similarRISK GROUP 3 – Warning: possibly hazardous optical radiation emitted from this product. Do not look at operating lamp source. Eye injury may result. EN/IEC 62471 – Hazard distance: refer to the manualMinimum distance of illuminated objectsUKCA – Comply to the UK regulations
Ever since the introduction of the XTYLOS fixture, Claypaky has been focused on developing new, pioneering technologies that offer new ways to motivate designers to reach further to inspire audiences. New MINI XTYLOS HPE opens opportunities to bring this unique technology where smaller, energy efficient, yet powerful fixtures are required for small and large venues and events.
MINI XTYLOS HPE (CJ3002) is a small form factor fixture with Claypaky’s innovative and proprietary RGB laser source, lasting 20,000 hours, that produces saturated, deep colors without any visible hotspots with its exclusive TURBO COLOR system.
The fixture offers linear virtual CTO, one effect wheel with two rotating and interchangeable prisms and one interchangeable frost filter, a 24-bit digital dimmer, a fast digital stop/strobe and have an aperture range of 1° to 4° to produce their incredible beam effects.
In addition to the typical features of the XTYLOS family, the MINI XTYLOS HPE delivers some new and exciting features: The unit offers endless pan rotation in both directions, that can be controlled at various speeds.
MINI XTYLOS HPE is very compact, operates on 100 to 240VAC and only consumes 80VA of power at 230VAC. The unit weighs just a mere 9 kilograms (20 pounds).
For the beam applications, the MINI XTYLOS HPE is the best option thanks to its high intensity which cannot be achieved by any other LED based beam fixtures. With only 20W laser engine power consumption, the MINI XTYLOS HPE delivers 2.5Mcd with 1° beam aperture.
The XTYLOS laser light source is currently the only technology that allows us to make such a small and compact beam fixture.
In the United States, the variance issued by FDA CDRH is required for the use of the MINI XTYLOS HPE (the same variance as for the Xtylos). The MINI XTYLOS is also available in a adjusted output version (CJ3003 ) which is fully homologated and does not require any FDA CDRH variance for the use in the United States
Light source: tailor-made RGB laser engine, enclosed in a sealed module
Long lasting light source (20,000 hours) with minimal decay
Laser-based system with derating to preserve laser diodes
Total output:
– MINI XTYLOS HPE: 2.5Mcd with 1° beam aperture
– MINI XTYLOS: 1.5Mcd with 1° beam aperture
MINI XTYLOS HPE (CJ3002) can be operated also in the adjusted output version to emulate the MINI XTYLOS (CJ3003) behavior
Solid, flat field, saturated, ultraconcentrated light beam without any visible hotspots
Exclusive mid-air graphic effects (BLazer effects)
Aperture: 1°-4° range
RGB additive color mixing, with exclusive TURBO COLORS
Linear virtual CTO 2500K – 6500K
Unequalled color consistency both across different fixtures and during lifetime
Endless PAN Rotation
One wheel with 2 rotating prisms (Pyramid 16 facets, Linear 6 facet) and 1 frost filter
Unmatched effect and color change speed
Motorized focusing to zoom in the prism and the frost
Ultra-precise 24-bit digital dimmer
High speed, digital stop-strobe effect
Extremely compact housing
CloudIO Ready: fully compatible with CloudIO
Laser engine power consumption: MINI XTYLOS HPE (CJ3002): 20W, MINI XTYLOS (CJ3003): 12W
Weight: only 9 kg (20 lbs)
Ունե՞ք հարցեր այս ապրանքի վերաբերյալ: Ուղարկեք մեզ նամակ, և մենք շուտով կապ կհաստատենք Ձեզ հետ:
